Prime. Dark colors, stains (once sealed), and previously unpainted surfaces (drywall, spackle, etc.) will need a primer coat, usually white. NOTE: most paint stores & home improvement centers will now tint primer (at no charge) to match fairly close to the color of the finished coat, that way two coats of primer need not be applied.[6] Although not all surfaces need a prime coat, skip this step at your peril! Dark colors will likely show through the first -- or even the first couple-- topcoats of paint. Sealants and unpainted surfaces like spackle patches will absorb or repel moisture in a topcoat at a different level than the areas surrounding them. Applying a good primer coat will help even out these differences. Primer equalizes a wall to a uniform surface. It's like erasing a canvas before drawing a new picture. Although some will argue the point, you generally don't need to spend a great deal on primer or buy special primer. A cheap, 5 gallon (18.9 L) bucket of plain, flat white paint will usually do the trick and cover a large area. Give your primer at least 24 hours to dry (follow its instructions) before applying a topcoat. House Painting

It's up to you. Outside is much harder because it requires more prep, patience, time, help, money and of course, effort. I have been painting my own houses and rental properties interiors for 20 years, and I painted the exterior of one, once. I then had it promptly done again by professionals who said it would have been cheaper if they didn't have to undo my work first. My advice is to get pros for the outside because everyone will see it.


As the dance proceeds, keep an eye on the weather. Rain can wash freshly applied latex right off the wall, and a temperature dip below 50 degrees F two days after application can interfere with adhesion and curing and dull the sheen of glossy paints. (Latexes like Sherwin-Williams's Duration and Benjamin Moore's MoorGard Low Lustre are formulated to tolerate temps as low as 35 and 40 degrees, respectively.)
The Ceiling. For ceilings, flat is recommended, except semigloss or satin should be used in bathrooms with showers/tubs. Some customers opt to go with a different finish for ceilings in general, to create a specific design look, i.e. high gloss ceilings on dining room tray ceiling to make a statement, or eggshell ceilings throughout to look modern and make a statement.  House Painting
If you have kids, pets, or occupants who will damage the walls, it is recommended to go with washable matte, eggshell, or satin, because these paints can be easily cleaned and are more durable. However, flat paint can be touched up more easily and hides imperfections better, so if you are selling the home, it is highly recommended to go with flat. Bathrooms with showers/tubs should go in semigloss- unless you are selling or want a specific design look, then use satin.  House Painting
×