O'Neil patches shallow holes and divots with Ready Patch because it dries fast, sands smooth, and stays flexible. Deep cracks and rotten spots are best repaired with two-step epoxies, such as those made by Advanced Repair Technology. (For a step-by-step instructions, see Repairing Rot with Epoxy.) The days of using polyester auto-body fillers on wood are over. "They cure too hard," says Portland, Oregon–based painting contractor Kathleen George. "They look good at first, but then they peel away." House Painting


Priming is compulsory if you're painting over a darker color, or on a new drywall, but it's a good idea to include this step before any paint job. A primer is necessary because it blocks any stains from bleeding through. It is also important because it prevents any blisters and paint-peeling by improving paint adhesion. Lastly, primer is a good idea as it allows complete single-coat coverage of the walls. If you want a better appearance, you can tint your primer with the final color you intend on using on the walls. Most paints today come with inbuilt primers, but an old school primer is still a better option. Before you start painting, remember to use painter's tape to cover your door frames, window sills, and any switches on the wall.

Use semi gloss for hallways because walls there are more likely to be touched, bumped or otherwise marked over time (semi gloss cleans more easily). However, use flat for a living room. Flat will help hide imperfections in the walls. If you want the same color in both the hall and living room, then no problem. Use flat in the living room, semi gloss in the hall, making the threshold the transition point. House Painting
The Cutters. Someone with meticulous attention to detail and a steady hand should be assigned the job of "cutting in," or painting a straight edge where needed, such as along a wall where the ceiling does not get painted. Many products are available to assist, but none work as well as a person who's good at doing it freehand. Ensure this person is skilled (ask them to show you). A poor, jagged, wavy or splotched cutting-in job will jump out at you every time you walk by it. Why more than one cutter? This job is nerve-wracking and painful to hands and arms after a few days. You'll want to give this person a break after a few walls. House Painting
Walls should be wet down before getting scrubbed, then washed with a gallon of water mixed with 1 cup chlorine bleach and 1 cup of either a concentrated, phosphate-free cleaner, such as a trisodium phosphate (TSP) substitute, or Jomax House Cleaner. Working in sections, from the bottom to the top, will avoid streaks. Be sure to rinse walls well before the solution dries. Wood siding and trim should be ready to paint after a day or two of dry weather.
Determine the coverage area for each color and estimate the number of gallons you'll need for each. For odd walls with angled ceilings, make your best guess. If you're not comfortable doing this, measure the wall at its highest height and multiply that by its width. Now subtract the lowest height from the highest height, multiply that number by the width, cut that answer in half, and finally subtract that new number from the original height by width. That should give you the wall area.
Prime. Dark colors, stains (once sealed), and previously unpainted surfaces (drywall, spackle, etc.) will need a primer coat, usually white. NOTE: most paint stores & home improvement centers will now tint primer (at no charge) to match fairly close to the color of the finished coat, that way two coats of primer need not be applied.[6] Although not all surfaces need a prime coat, skip this step at your peril! Dark colors will likely show through the first -- or even the first couple-- topcoats of paint. Sealants and unpainted surfaces like spackle patches will absorb or repel moisture in a topcoat at a different level than the areas surrounding them. Applying a good primer coat will help even out these differences. Primer equalizes a wall to a uniform surface. It's like erasing a canvas before drawing a new picture. Although some will argue the point, you generally don't need to spend a great deal on primer or buy special primer. A cheap, 5 gallon (18.9 L) bucket of plain, flat white paint will usually do the trick and cover a large area. Give your primer at least 24 hours to dry (follow its instructions) before applying a topcoat. House Painting
The Ceiling. For ceilings, flat is recommended, except semigloss or satin should be used in bathrooms with showers/tubs. Some customers opt to go with a different finish for ceilings in general, to create a specific design look, i.e. high gloss ceilings on dining room tray ceiling to make a statement, or eggshell ceilings throughout to look modern and make a statement.  House Painting

When it comes to applying a fresh coat of paint to your home, historic brownstone homes may have different considerations than a modern apartment or townhouse. More so, brick, vinyl, and siding all react differently to the extremes of New York City weather, meaning you’ll need high-quality exterior paint to withstand whatever Mother Nature throws our way.


Prep the house. Wash the walls, remove wallpaper, patch, spackle, seal stains, dry and sand before you attempt to paint. Now is also the time to apply painters tape for trimming, lay drop cloths, etc. Remove all outlet and light switch face plates, collecting screws in a zip-top bag (good opportunity to wash the face plates all at once as well).[4] You can also buy your paint at this time. Don't wait until the last minute. It can take hours to mix many gallons of all your colors. Remember that traffic triples at your home-supply and hardware stores on weekends. Buy on a weekday if possible. House Painting
O'Neil patches shallow holes and divots with Ready Patch because it dries fast, sands smooth, and stays flexible. Deep cracks and rotten spots are best repaired with two-step epoxies, such as those made by Advanced Repair Technology. (For a step-by-step instructions, see Repairing Rot with Epoxy.) The days of using polyester auto-body fillers on wood are over. "They cure too hard," says Portland, Oregon–based painting contractor Kathleen George. "They look good at first, but then they peel away." House Painting
If you have kids, pets, or occupants who will damage the walls, it is recommended to go with washable matte, eggshell, or satin, because these paints can be easily cleaned and are more durable. However, flat paint can be touched up more easily and hides imperfections better, so if you are selling the home, it is highly recommended to go with flat. Bathrooms with showers/tubs should go in semigloss- unless you are selling or want a specific design look, then use satin.  House Painting
×